Soft Elements in Al Bateen Executive Park, Abu Dhabi.

Your project routes through Abu Dhabi Municipality liaison first for community NOC, then ADM (Abu Dhabi Municipality) for the engineering permit. Buildsmith® handles both — submission, follow-up, inspection close-out and final completion certificate are all standard scope. We do not start work until the community NOC is granted.

Yes — we deliver across Al Bateen Executive Park Plaza, Al Bateen Executive Park Tower, Al Bateen Executive Park Business Centre, Al Bateen Executive Park Pavilion. Each cluster carries its own approval nuances (façade restrictions, working-hour windows, skip-permit rules) — we map these at survey before quotation.

Yes — we deliver across the full Al Bateen Executive Park typology spectrum, from Boutique office (50–200 sqm) through Full-floor (700+ sqm). Every project is fixed-price under one design-and-build contract, scoped against your specific unit and finish brief. Indicative figures and a sequenced programme are issued within one business day of survey, never against a generic per-square-foot rate.

Three constraints we always plan for in Al Bateen Executive Park: ADM (Abu Dhabi Municipality) permit for any modification; Community management or building-association NOC required; Working hours 08:00–17:00 weekdays. We surface these at the quotation stage so the programme reflects them — not at week three when they suddenly stop site work.

Every soft element supplied to Al Bateen Executive Park carries documented HIC (Head Injury Criterion) drop-test certification per EN 1177 with Critical Fall Height matched to your equipment. Abu Dhabi Municipality liaison / inspection authority gets the certificate pack at delivery — required for licensing, insurance and audit.

HIC = Head Injury Criterion. EN 1177 specifies a drop-test where a steel headform is dropped onto the surface from a defined height; the deceleration is measured. The result is a Critical Fall Height (the maximum height the surface can protect from). UAE early-years authorities check HIC on all play-area surfacing.

Foam tiles are safe up to a Critical Fall Height that depends on the foam density and thickness — typically 0.6–1.2m. For taller equipment (slides, climbers above 1.2m) you need thicker rubber surfacing or wet-pour systems. We specify the surfacing to match the equipment's fall height — never the other way round.

Yes — for nursery operators, schools and hospitality clients we deliver brand-coloured and brand-printed ranges. Wall padding, soft-play kits, cushions and sensory panels can all be made in your brand palette and with printed graphics — all to the same EN certification.