Soft Elements in Victory Heights, Dubai.

Your project routes through SOAMS (Sports Owners Association) first for community NOC, then DDA for the engineering permit. Buildsmith® handles both — submission, follow-up, inspection close-out and final completion certificate are all standard scope. We do not start work until the community NOC is granted.

Yes — we deliver across Calida, Esmeralda, Estella, Mirador, Morella, Oliva and other Victory Heights sub-clusters. Each cluster carries its own approval nuances (façade restrictions, working-hour windows, skip-permit rules) — we map these at survey before quotation.

Yes — we deliver across the full Victory Heights typology spectrum, from 3-bed Town House through 6-bed Andalusian. Every project is fixed-price under one design-and-build contract, scoped against your specific unit and finish brief. Indicative figures and a sequenced programme are issued within one business day of survey, never against a generic per-square-foot rate.

Three constraints we always plan for in Victory Heights: SOAMS NOC required before any external modification; Golf-buggy access on internal roads only — vehicle deliveries via main gate; Working hours 08:00–17:00 weekdays. We surface these at the quotation stage so the programme reflects them — not at week three when they suddenly stop site work.

Every soft element supplied to Victory Heights carries documented HIC (Head Injury Criterion) drop-test certification per EN 1177 with Critical Fall Height matched to your equipment. SOAMS (Sports Owners Association) / inspection authority gets the certificate pack at delivery — required for licensing, insurance and audit.

HIC = Head Injury Criterion. EN 1177 specifies a drop-test where a steel headform is dropped onto the surface from a defined height; the deceleration is measured. The result is a Critical Fall Height (the maximum height the surface can protect from). UAE early-years authorities check HIC on all play-area surfacing.

Foam tiles are safe up to a Critical Fall Height that depends on the foam density and thickness — typically 0.6–1.2m. For taller equipment (slides, climbers above 1.2m) you need thicker rubber surfacing or wet-pour systems. We specify the surfacing to match the equipment's fall height — never the other way round.

Yes — for nursery operators, schools and hospitality clients we deliver brand-coloured and brand-printed ranges. Wall padding, soft-play kits, cushions and sensory panels can all be made in your brand palette and with printed graphics — all to the same EN certification.